工程测量英文自我评价

工程测量英文自我评价如何写呢？我们一起来看一看：

工程测量英文自我评价写作方法：1、首先可以写自己在工作期间的表现或感谢公司给予的平台；2、然后可以写自己的工作总结以及工程测量工作中的注意事项；3、最后结尾部分可以写对自己未来的期望以及自己今后努力的方向。

工程测量英文自我评价篇一

First, we must have a good grasp of the basic theoretical knowledge Our internship is the root of the smooth success of our basic theoretical knowledge, our group of students learning achievement are good, usually more serious study, boys and girls are the first In our group, it is really great. Other students are also great, the use of the instrument is very correct and skilled, particularly serious about digital processing, and in strict accordance with the basic provisions, such as "the scope of the error limit, from the whole to the local, from the control to the Department of broken" and so on. In short, we usually work hard to learn is the basic guarantee for the smooth conduct of the internship.

Second, we must have the spirit of innovation, although we usually feel good learning, but to the hands-on practice, we began to really eat a little bit of the tiger - no way to start. However, we dare to practice, the courage to explore, the courage to innovate, and finally, we completed a copy of a homework. And our internship report miraculously from scratch, from less to more, from simple to complex and then complete, and ultimately become a perfect answer. I am proud of our spirit of being able to practice and be innovative. In the future work should make good use of this wealth!

Third, there must be realistic and pragmatic spirit In the first two days of measurement practice, we in order to speed up the progress of the work are very fast, there is no timely processing of data, the results to distance data, we found that we Of the data can not be used, however, we did not relax themselves, we all agreed to re-do, after repeated measurements, we finally got a reasonable data, pay a satisfactory job. I think we engaged in the structure of the people not only in the measurement must have the spirit of seeking truth and being pragmatic, engaged in any work should have the spirit of seeking truth and being pragmatic. The only way to do a qualified construction industry talent.

Fourth, the failure is the mother of success, practice makes perfect After a time of error, again and again retest, a second calculation, the operation of our instruments have been further improved, the speed of measurement is also faster and faster, accurate data Sex is getting higher and higher. This also thanks to a second failure, again and again to rally, time and again to practice. At the same time, failure also honed our will, the more rub Yong Yue.

5, the unity of the group - criticism - re-unity is very important group to give full play to the ______, but also the implementation of the ______ above the concentration. A person is not a panacea, depends on everyone, a person's knowledge can not be comprehensive, rely on the collective, a person is wrong is not terrible, to dare to expose errors in front of everyone to accept criticism. In the ongoing debate, we can find the problem, study the problem, solve the problem, the formation of the group the most correct views. This should be called on the basis of unity to dare to criticize, but also to work together for the purpose of it! Of course, the group's "unity and mutual assistance" would not have said it.

Six, the teacher's guidance is very important In practice, we inevitably have some problems can not be solved, then, thanks to Chen, Wang careful and patient guidance, we only enlightened, thinking and more open. We have such achievements first of all to thank our instructors - Chen and Wang.

工程测量英文自我评价篇二

This practice makes me deeply feel the difference between theory and practice, from now on, not only to seriously learn the theory of knowledge, but also to focus on strengthening the practical hands-on ability to make their own more comprehensive development of a comprehensive development of the project, . At the same time, engineering measurement is also a technical live, it needs to measure personnel seriously, careful, patient; team members should also work together, as far as possible in all aspects of measurement to maintain a high accuracy, the only way to efficiently complete our Of the measurement tasks.

In fact, this measurement makes me feel the deepest is the close cooperation between the players, measurement has just begun, we are a group of nine people is not clear division of labor, the results of measurement work was very slow, but we soon found Measurement work is included in all aspects, and we immediately assigned a good task, have defined their own work, such as: in the measurement of elevation, the need for two feet to help the staff in two turning points to help leveling, a classmate Responsible for adjusting the instrument and readings, and a student is responsible for correcting readings, record data, in addition, there is a student specifically responsible for data checking, so, in order to ensure that the measurement of the surveyor's work smoothly; another example: We divided into three groups, one group with a steel ruler, the other with a tape measure at the same time, there is a group responsible for processing data and drawing. In this way, we have a clear division of labor, unity and cooperation, and efficient completion of our measurement work.

In addition, the measurement work is complicated and complicated, including many details, such as selecting the datum point, marking, installing the instrument, adjusting the level, setting the level of the ruler, aiming at the target, recording data, processing the data and checking the error. So many details, to say which is more important, in fact, each aspect is very important, each step can not be errors, or it may retest, to bring unnecessary trouble measurement. To give an example: a vertical ruler, a central level of a circular level, when the ruler to try to bubble in the middle position, which is a technical live, you need to Mozhun the law can be fast and accurate to the standard foot righting , But can not arbitrarily put the ruler to the ground a stand, otherwise it will make the data deviation and need to re-test, delay measurement process. Therefore, the measurement must develop a serious and careful work attitude.

The measurement practice, but also let me understand the hardships of construction and measurement of the importance of the work. In order to ensure that internships can be completed on time, our group members get up almost at six o'clock every morning, arrive at the measuring location, place the instruments, then take turns to eat breakfast, and sometimes do not take a nap at noon , The afternoon until dark can not see the time Hou back to dinner, to stay later also stay up to the day of data processing, often to 12 o'clock in order to go to bed ... ... the whole week is so, we all Very hard. However, in my view, although a little tired, a little hard, this a few

Days is my most fulfilling days. Because in the past few days inside, I not only learned a lot of classroom learning not the measurement of knowledge, but also to develop some good habits, which for my future development will be of great help. Measurement practice is about to end, I will sum up the practice of this pros and cons, find their own shortcomings, and through future efforts to learn to make up for my shortcomings, prepare for the future career in order to achieve greatersuccess!

工程测量英文自我评价篇三

The two-week measurement internship has ended. Recalling the past few days of internships, although had to feel the essence of exhaustion, but we harvest a skill, but also gain a memorable experience.

Because measuring engineering is a very practical subject, measurement practice plays an important role in cultivating students' thinking and hands-on ability, mastering specific work procedures and contents. Although we measured in school, but the difficulty can not be compared with the field, our aim is to consolidate the textbook in the survey practice knowledge, to solve the remaining problems, found in learning deficiencies, to make up for missing knowledge points.

Every morning, we resist fatigue, put on the moon, carry instruments to practice place, at night, we organize the industry, mutual exchange, we are not afraid of hardship, unity and cooperation.

Through this internship I fully understand the importance of theory with practice, theoretical understanding does not mean that can be fully utilized in the actual operation of the process we have encountered many problems, but after our exploration, many have overcome, can not alone overcome, We have also been overcome by seeking the help of other students and teachers. It can be said that this practice is not only exercise the practical ability to consolidate the knowledge, but also to fully strengthen the students and students, students and the feelings between teachers. I believe that this internship will become an unforgettable memory of all of us in college life.

以上就是小编今天的分享，希望可以帮助到大家。

工程测量自我评价总结

建筑工程测量个人年度工作总结范文精选四篇

建筑工程测量个人年度工作总结范文精选1

   20xx年，我队勘探任务重，参与了总公司重点工程“xx”会战和“xxx”区块项目，特点是任务紧、施工难度大、气候恶劣、组织困难、技术要求高等，但全队职工团结一心、连续作战、克服种种困难和不利因素，优质、圆满的完成了任务，受到上级和甲方的一致好评。

   我作为一名常规组观测员，同时也是一个测量小组班长，克服的困难是外行人不知、不能想到的。常规测量组的特点是民工多，要花大量精力去协调民工在工作、生活中的种种情况，组织班组正常运作，同时观测员又要不停的施测，而常规组所测线段又是gps不能施测地段，往往是深谷、悬崖、植被参天的无人区，施工难度极大、吃住无着落。在这种情况下自己又饥又渴还不能表露，还要以饱满、乐观的情绪去带动班组。比如，在“龙岗”会战中正值严寒的元月，雨雪飘飞，寒风刺骨，但总公司的重点工程不能因气候的恶劣就停工，只能坚持，十天有九天没吃过午饭，十天有九天衣裤能拧出水。

   我是一名老观测员，在多年的野外工作中身患风湿、胃病、眼睛近视度数也越来越高，但作为一名观测员，一名班组长，在强烈的责任驱使下咬着牙带病坚持，带领全组人员高质量、多数量的完成了任务。紧接着我队又接到了“大足—安岳”区块的勘探任务，时值火红的七月，每天在户外烈日下工作十一、二个小时，同样也没穿过干衣服，服随时能拧下汗水，观测站都是设在无遮蔽的同时通视处，太阳再大也没法稍避一下，作为班组长是不能叫苦的，只能心里不断鼓励自己坚持，坚持过去就是胜利。同时，把这种精神传递给大家，在这种精神自励下我们小组在“大足—安岳”工区同样又取得了高质量、多数量的好成绩。完工后回家一称体重瘦了整整二十四斤，晒成了“非洲人”。

   地震队的工作性质决定了它的清苦，但往往看到媒体新闻中“中石油”接报频传，欣欣向荣的气象，我都会自豪的说这是我们石油人汗水、坚韧、艰苦奋斗的成绩，我为中国石油骄傲，我为我是一名石油测量人自豪。

建筑工程测量个人年度工作总结范文精选2

   测量是工程的眼睛，作为测量人员，我们本着实际求实、一切以数据说话的原则从事测量工作。20xx年在项目部测量工作中，总结出一些经验与教训，以利来年更好开展工作。

   一、测量工作具体内容

   测量之前，应熟悉图纸、编制测量方案、针对业主提供前期建筑图纸编一套测量程序，以利测量工作。

   1、控制网点的布设。控制点选取后，在地面上做好标记，对于需要长期保存的控制点，应埋入石桩或混凝土桩，打入铯钉并用红油漆标注标志，通过两个已知点测出该点高差和位置关系，并闭合到另一个控制点，做好成果记录。以保证所移交的控制点、标高点资料的正确。

   2、控制网点的加密。设计单位提交的坐标控制点、水准点是设计阶段为满足设计要求建立的，并不能完全保证施工现场测量放样的需要，且其中有些控制点在施工过程中会被覆盖、破坏而消失。因此，在开工前，测量人员开展好加密控制网点的工作，以保证路线及构造物各部位都能准确定位及施工过程个别桩位丢失后也能有足够的精度恢复桩位。

   测量人员正式接受坐标控制点、水准点桩位后，应根据现场情况及施工技术规范要求，立即开展施工测量控制网点的加密工作。使用的仪器必须经过检验标定，符合精度要求。拟定加密控制网点测设方安案，测量人完成加密控制网点工作后，应书面向监理工程师提交报告和计算资料。监理工程师复核检测结果进行审核，认为准确无误，精度符合要求后，可以使用。

   3、施工放样复核。测量人员应按施工现场劳务队伍施工需要将施工位置和高程正确地定到地面上。为防止施工放样测量发生错误，给工程带来损失，施工测量控制网点已完善并经监理工程师批准后，可以开始做具体分项工程的施工放样工作。在测量放样开始前，测量人应提交一份测量放样计划方案，测量放样过程中监理人员应旁站，以保证施工放样方法及测读无误。放样测量的报检表和原始记录应在施工开始前交监理工程师审核签认。首先，编制测量方案，在施工测量过程中均要按批准的方案实施，且先进行自检、互检，合格后再请监理人员复核。

   二、测量工作管理

   在平常的工作中积极督促监督施工队按照测量时所放线位施工，并且保护好测量时所放线位，加强再平时工作中的的巡察，加强过程控制，做到有问题及时发现及时解决，及时改正。将错误消灭在萌芽状态之中，不是其成为工程进度的绊脚石。

   三、测量资料的整理

   测量资料严格按照资料规程中要求进行编制，根据现场的施工进度编制相应的资料记录，资料要同步，按时完成，内容要清晰，准确，不能缺项，漏项，并及时整理归档，使每项测量工作都有依据性和可追溯性。

   四、工作中的一些经验

   ①水准控制点应选在地势较高，视野开阔的地点，便于施测周围地形。

   ②相邻两点间互相通视，便于测量。

   ③水准控制点及坐标控制点设置在平坦，土质坚实、不易破坏的地面设置，便于架设仪器。

   ④相邻控制点的边长要大致相等，相邻边长不应悬殊过大。

   ⑤施测中为保证测量精度，通常用以距离较远的后视观测距离较近的目标点，不应用短距后视测设长距目标点。

   ⑥在标高点以及坐标控制点的布设中，要遵循同一后视，闭合测设，以降低测量累积误差。

   五、个人工作改进措施及计划

   在今后的工作中根据现场出现的问题积累经验，吸取教训，加强新知识，新理论的充实，个人操作技术的加强，管理意识的加强，配合其他部门做好本职工作。

   明年的工作中，在闲暇时间多与片区其他项目测量员互相交流经验，分享心得，互相提升。做到别人出现的问题我不会再出错，我自己出现过的错误不再次发生，做到慢慢蜕变，直到破茧成蝶。总结旧的一年快过去了，新的一年将要到来。回顾这一年工作我体会到了工作中的幸苦和快乐。但是我想就算对工作付出的再多也是值得，因为我所学的东西将会在我以后人生旅途中发挥着很大的作用。

   在今后的工作中，我会不断加强自己的业务水平与能力，向身边的同事学习更多的专业理论知识和现场施工管理，将理论与实际相结合，总结经验、吸取教训，用积极向上的工作热情；吃苦在前、享受在后的工作作风，去挑战困难和挫折。与同事团结合作、互帮互助，共同创造美好的明天，为公司的发展壮大添砖加瓦。

   最后我要再次感谢公司的领导以及项目部的同事，是你们提供给我这么大一个学习工作的平台，让我见识到了建筑这一神圣的工作，我一定不负你们的期望全面提高自己努力做好一个新时期的人才。

建筑工程测量个人年度工作总结范文精选3

   时光荏苒，紧张忙碌的20xx年即将过去，在即将过去的一年里，在公司和项目部的领导下，我们取得了可喜的成绩，回顾过去成绩固然可喜，可我们也要看到我们工作中存在的不足。我们要戒骄戒躁，以饱满的热情迎接xx年，迎接我们的奥运之年。

   在20xx年的我担任测量和工长两项工作，多一份工作，肩上的的担子就会重一些，压力也会大一些。

   测量放线是建筑工程之本。俗语说得好“无规矩不成方圆”。测量放线就是工程中的各工种的标尺，没有它我们的工作就没了目标，就是盲目的工作，就成了盲人骑瞎马。就会出现不应该出现的错误。本身我们的工程就是长城杯工程，对工程中各工序要求相当严，所以我本人也对自己本职工作要求比较严格。紧紧围绕长城杯要求来要求施工队的测量放线工，在尽量减小误差，消灭错误的前提下。把自己的本职工作做好。为本工程的顺利施工提供最有利的保障。在平常的工作中积极督促劳务队的放线工搞好放线工作，并协助他们做好楼层平面放线和楼层高程的抄测。加强再平时工作中的的巡察，加强过程控制，做到有问题及时发现及时解决，及时改正。将错误消灭在萌芽状态之中。不是其成为工程进度的绊脚石。在今年的首次长城杯检查中，严格按照总工办的要求将楼层的轴线和高程标识清楚。测量资料严格把关。

   今年7月份我还担任了土建工长，主管北楼的全面工作。在工作中注意团结同事，严格要求自己，及时掌握工程动态。工作之初，正是工程最困难的时候，地下一层正在施工劳务队人员不稳定人心极度涣散，管理人员同样不稳定。施工毫无进度可言，经过一段时间的努力，终于将其顶板封顶，可是到了首层劳务队的大模板工又遇到了同样地问题，人员不稳定，技术力量薄弱，根本达不到工程的要求。砼班组也更换了两三拨。在这样困难的情况下，我们在项目部领导的带领下群策群力和北楼所有同事的努力下，克服困难终于改善了北楼的状况。使其在进度还有质量上有了很大的改观。同时保证了在今年年底顺利封顶。再平时的工作中积极协助项目部领导的工作，将北楼的屋面做法和楼内的二次结构的砖用量和混凝土用量计算出来，为来年的工作做好基础。

   在今年的长城杯、市级文明工地和公司的外审工作中也做了大量的工作。

   时光飞逝，在紧张忙碌的工作中更具体的理解了公司的程序文件，贯标思想和公司时刻紧抓的安全、质量的方针以及长城杯的目标下送走了20xx年。回想过去，展望未来，忙碌之中有着忙碌的喜悦，付出得到了应有的回报，心情舒畅。展望xx的工作在新的一年里不但对进行精装修，同时也对自己进行更全面的“精装修”。

建筑工程测量个人年度工作总结范文精选4

   时光飞逝，转眼间XX年又到尾声了。测量是工程的眼睛，作为测量人员，我本着实事求是、一切以数据说话的原则从事测量工作。我静心回想这一年的工作生活，感受很多，收获颇丰。现将我这一年来的工作学习情况总结如下：

   俗语说得好“无规矩不成方圆”。测量是建筑工程之本，是工程中的各工种的标尺。没有它我们的工作就没了目标，就是盲目的工作，就成了盲人骑瞎马，就会出现不应该出现的错误。刚开始我以为测量放线是个很简单的工作，后来在工作中慢慢发现，其实不然，它也有好多要学习的地方。在这一年的工作中时刻严格要求自己，不断加强自己的工作能力，和项目部技术人员互相交流，互相学习，扬长避短，对测量工作做到严格控制，和同事一起努力完成每一项测量任务。

   在施工测量之前，认真审图，对图上有误、有疑义的地方及时向领导及前辈们请教、咨询、学习。测量放线中向同事学习，相互配合。从陌生到熟悉，不断总结经验、努力提高了工作效率。测量放线后认真复合线的位置确保准确性。在测量放线中各类仪器能准确、快速的使用。在测量放样过程中，有时候会面临改线、补线的问题，这也是发现问题解决问题的过程，使得我对疑惑的地方理解和掌握的更加彻底，也培养严谨的工作态度。社会在进步，时代在发展，只有不断学习，才能与时俱进。通过书籍及同事的帮助指导学习了更多的施工工艺和施工方法，了解各项规范。在如今高速发展的社会，不能自我提高就意味着落后，就不能适应目前施工建设工作的发展要求。所以在今后的工作中，本着严格要求自己，在尽量减小误差，消灭错误的前提下，把自己的本职工作做好，为本工程的顺利施工提供最有利的保障。在平常的'工作中积极督促劳务队配合我们的放线工作，做到有问题及时发现及时解决及时改正，将错误消灭在萌芽状态之中，不让其成为工程进度的绊脚石。

   在这一年的工作中，从刚来工地的好奇到熟悉，得到了至深的锻炼，专业知识有了进一步提高，而自己也变得成熟、稳重。尽管这一年当中我取得了一定进步，但这并不代表自己就是一个合格的测量员，相对于自己期望还相差甚远，对于现在的我还有很多需要学习改进的地方。在今后的工作中根据现场出现的问题积累经验，吸取教训，加强新知识、新理论的充实，加强个人操作技术和管理意识，配合其他部门做好本职工作。

   明年的工作中,在闲暇时间多与其他项目测量员互相交流经验，分享心得，互相提升。做到别人出现的问题我不会再出错，我自己出现过的错误不再次发生。做到慢慢蜕变，直到破茧成蝶。

   在以后的工作中，我会更加的努力学习，提高自己，不断提高自己的专业技术水平，在施工过程中高标准，高要求来完成施工任务保证工程的顺利进行。向同事们发奋学习，更好的完成领导安排的任务。拓宽思路，深化细化本职工作，努力为公司创出更大的效益，不辜负领导和同事们的期望。